barrytr4 Posted December 1, 2020 Report Share Posted December 1, 2020 hi Mates Getting my Tr4 ready for inspection, trying to seal F/glass gearbox cover to stop fumes entering the cab, when I noticed the brake/ clutch pedal arms aren't sealed from the engine bay, is this normal , if so would that fail? thanks a lot Barry Quote Link to post Share on other sites
Andy303 Posted December 1, 2020 Report Share Posted December 1, 2020 There are no rubber gaiters or seals as such. The pedals are enclosed by a sheet metal cover on the interior side that sort of seals things, but I do not think it is entirely air tight by any stretch. Check out Steve Maas's excellent site: http://www.nonlintec.com/tr4a/brakes/ Quote Link to post Share on other sites
barrytr4 Posted December 1, 2020 Author Report Share Posted December 1, 2020 Hi Andy thanks for that , when I looked I thought the slots were inside as well , now i can see the box covers them, it's look's ok now-- Barry Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.