Josephbedford Posted November 15, 2020 Report Share Posted November 15, 2020 Hi. Could someone help with a problem with clutch master cylinder rubber seals. Which way do the seal lip face into the cylinder bore ?Thank,s in anticipation of any help with this,I tried looking in the HAYNES BIBLE but does not mention this. Nond regards Joe. Quote Link to post Share on other sites
John L Posted November 16, 2020 Report Share Posted November 16, 2020 Hi Joseph Welcome to the Forum. Download a Brown Bible from this website, its much better than the Haynes manual. http://vitessesteve.co.uk/index John Quote Link to post Share on other sites
Paulfc Posted November 16, 2020 Report Share Posted November 16, 2020 (edited) Joe, Just to reinforce John’s comment above, I recently renewed the seals on my CMC using the WSM as my guide and it was straight forward. Also, my renewal kit contained parts I did not need. Presumably it covers more than one cylinder size/type. Paul Edited November 16, 2020 by Paulfc Quote Link to post Share on other sites
Josephbedford Posted January 23, 2021 Author Report Share Posted January 23, 2021 Hi decided in the end to fit complete New clutch master cylinder,thank,s for all replies Joe Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.