brian -r Posted October 23, 2020 Report Share Posted October 23, 2020 Has anyone bought any of this make of power tool. Just had a Lidl leaflet through the door one or two bits that may be useful for occasional use in the garage ,wouldn't expect anything super but are they any good for the odd job. Thank's Bri Quote Link to post Share on other sites
Lebro Posted October 23, 2020 Report Share Posted October 23, 2020 Yes, I have collected quite a number of these from Lidl. they all seem to be of good quality, & very good value. Bob. Quote Link to post Share on other sites
brian -r Posted October 23, 2020 Author Report Share Posted October 23, 2020 Thanks Bob , I will take a look tomorrow if the store is not too busy Bri Quote Link to post Share on other sites
RogerH Posted October 23, 2020 Report Share Posted October 23, 2020 I bought a Digital Volt Meter at Lidl a couple of years back and it is doing very well. I think if you do not expect too much then you will be nicely surprised. I wish they would bring their insulated overalls back. Mine are worn out. Roger Quote Link to post Share on other sites
Nigel Triumph Posted October 23, 2020 Report Share Posted October 23, 2020 3 hours ago, Lebro said: Yes, I have collected quite a number of these from Lidl. they all seem to be of good quality, & very good value. Bob. That's my experience too. Lidl tools are fine for general DIY use. Everyday, worked hard in a professional environment, perhaps they would come up short, but still good value. Nigel Quote Link to post Share on other sites
Waldi Posted October 23, 2020 Report Share Posted October 23, 2020 I have a LIDL Parkside band grinder, it is good (around 40 euro), recommeded. But also a “vertical drill column” of the same manufacturer which is really el cheapo, both price and quality, not recommended. Waldi Quote Link to post Share on other sites
David B2 Posted October 23, 2020 Report Share Posted October 23, 2020 Purchased the Rotary tool and the drill grinder in their latest sale. Rotary tool works well, sturdy and is compatible with Dremel tool accessories for future. Made in Germany. Recommended. haven't used the Blade/Drill grinder yet so cannot say. Other Parkside tools in store looked good and very well priced for serious DIY use. David B Quote Link to post Share on other sites
Eddie Trickett Posted October 23, 2020 Report Share Posted October 23, 2020 Bought a 9" angle grinder a few years ago. Worked fine on the odd job for a few years then when used for several flags it packed up. So OK for light use which is what most people need. Eddie Quote Link to post Share on other sites
brian -r Posted October 25, 2020 Author Report Share Posted October 25, 2020 Thanks for the info everyone , the tools I wanted have not arrived in store yet , for some reason but are expected. Will pop in again Bri Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.