Jump to content

Gear box cover

Recommended Posts

Hi Rob

Ive just fitted a Racetorations fibreglass 2 piece cover. It’s a mould taken from the original fibreboard design, but you still need to drill holes for the bolts into the floor and around the front flange and centre inner flanges.

The rear section comes away separately allowing access to propshaft, and overdrive solenoid etc, and a separate cover for the speedo drive.

It does fit well but drilling the holes is time consuming. I stuck a drill up from beneath the car then filed holes to suit. The self tappers provided are okay, though I put spire nuts around the join of front and rear sections so the screws wouldn’t eventually strip out the threads.




Link to post
Share on other sites
4 hours ago, rob7 said:

Thanks Kevin l will have a look on there web site 

And if you want to use the extra access ports make sure your carpet can be lifted without removing the H frame after  you reinstall the cover.

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.