Paulfc Posted September 17, 2020 Report Share Posted September 17, 2020 Hi, My clutch master cylinder reservoir is stamped “Girling 70“. Can I safely assume this indicates the bore size i.e. .70? Thanks. Quote Link to post Share on other sites
Waldi Posted September 19, 2020 Report Share Posted September 19, 2020 I think so Paul. You can measure the bore diameter to confirm once removed. Waldi Quote Link to post Share on other sites
Paulfc Posted September 19, 2020 Author Report Share Posted September 19, 2020 Thanks Waldi. I had checked a few other sources and confirmed it was .70 so bought the refurbishment kit and the job is now done. Thanks Quote Link to post Share on other sites
Waldi Posted September 19, 2020 Report Share Posted September 19, 2020 Perfect Paul, better to recondition an original cylinder. Sometimes a part of the bore is corroded (especially on the slave). Careful inspection after honing with a torch will show the condition. Regards, Waldi Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.