Jump to content

Recommended Posts

Hi All

Tried a search on this but after 14 pages gave up. I have a RHD CP 6 and I need to replace the Tacho cable but there are a number of sizes I see. My inner cable length is roughly 42 inches (old school) and the are cables availanle are from 39 to 48 inches. Can anyone tell me the correct length for my TR6, do I have the wrong one in the first place ?

Thanks to all who reply 

Link to post
Share on other sites
1 hour ago, stevenphillips said:

Hi Roger 

Thanks for the reply , I assume that's the correct length then

Steve

Never measured mine. It works, when I get cables replaced I just give a local instrument specialist the old one and he replicates it. There's been a lot of messing about with my tacho and speedo cables over the years, so I cant trust the books.

Does your old cable work ? 

Link to post
Share on other sites

Brian, I think you are talking about complete cable assemblies and Steve is talking about inner cables. Obviously , the inner cable assembly has to match the existing outer if the outer is retained.

That said, if there's any uncertainty about the  inner length, it's probably better to replace the complete assembly rather than risking a too long inner destroying the tacho internals . 

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.