RobinTR Posted August 24, 2020 Report Share Posted August 24, 2020 Refitting the reinforcement gussets at the base of the B-posts. Original reference points were absent, but looking at pictures of other cars it appears that the raised triangle part is in exactly the same plane as the flange for the door seal. Is this right, or is there a set distance between the plate and the flange to allow for the correct fitting of the seal? Quote Link to post Share on other sites
mtrehy Posted August 24, 2020 Report Share Posted August 24, 2020 If you put it too far outwards it comes very close to the door cards - particularly if you have plushly trimmed cards. Quote Link to post Share on other sites
Peter V W Posted August 24, 2020 Report Share Posted August 24, 2020 Robin, see attached photo. I think you are about right, the gusset is not vertical but follows the B post flange. I just changed my door seals and they are a tight fit in that area. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.