Jump to content

wiring question

Recommended Posts

The photo below shows the current positive power configuration on my tr7. the thick red goes from the battery to the starter motor with the 2 browns piggy backed into the cable which then power the fusebox onwards.


I'm going to replace the main thick red live feed but what options are there for attaching the brown lives without piggy backing the middle of the red cable? a simple screw on to the battery clamp?




Link to post
Share on other sites

Do not forget that those two brown wires will need to reach the top of the battery to connect.

TR6 from 1974 used the same spliced in arrangement but the battery cable overall was a different length.  It replaced the 150640 connector block item 32  https://www.moss-europe.co.uk/shop-by-model/triumph/tr5-6/electrical-system/wiring-harnesses-fittings/wiring-harness-fittings-tr5-6-1967-76.html


Peter W

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.