jfg Posted August 21, 2020 Report Share Posted August 21, 2020 The photo below shows the current positive power configuration on my tr7. the thick red goes from the battery to the starter motor with the 2 browns piggy backed into the cable which then power the fusebox onwards. I'm going to replace the main thick red live feed but what options are there for attaching the brown lives without piggy backing the middle of the red cable? a simple screw on to the battery clamp? Quote Link to post Share on other sites
RobH Posted August 21, 2020 Report Share Posted August 21, 2020 (edited) There are battery clamps available with multiple outlets for ring terminals. eg: https://www.autoelectricsupplies.co.uk/product/1367/category/26 Edited August 21, 2020 by RobH Quote Link to post Share on other sites
Richardtr3a Posted August 21, 2020 Report Share Posted August 21, 2020 Auto electrics answer looks better than the original. good luck Richard & B. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted August 22, 2020 Report Share Posted August 22, 2020 Do not forget that those two brown wires will need to reach the top of the battery to connect. TR6 from 1974 used the same spliced in arrangement but the battery cable overall was a different length. It replaced the 150640 connector block item 32 https://www.moss-europe.co.uk/shop-by-model/triumph/tr5-6/electrical-system/wiring-harnesses-fittings/wiring-harness-fittings-tr5-6-1967-76.html Cheers Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.