Eddie Trickett Posted July 21, 2020 Report Share Posted July 21, 2020 I suspect the doors on my car are TR6 because of the inner pull handle and lack of holes for the stainless outer trim. Unfortunately I have had them painted before drilling any holes but suppose I can always put something on to try and prevent rust at the drilled holes. Does anyone know how many fasteners I need for the trim? I have some 2nd hand trim which I am informed is wlder than TR4. Thanks Eddie Quote Link to post Share on other sites
M. Pied Lourd Posted July 21, 2020 Report Share Posted July 21, 2020 On the doors alone (if that is what you are asking) there are 6 rivet clips on my TR250. Cheers Tush Quote Link to post Share on other sites
250 Posted July 21, 2020 Report Share Posted July 21, 2020 Hi Eddie, Mine too, but I would of thought you could fit as many as you need Mark Quote Link to post Share on other sites
Eddie Trickett Posted July 21, 2020 Author Report Share Posted July 21, 2020 Thanks Tush and Mark, It is only the doors. The wings have the holes drilled in them. Regards Eddie Quote Link to post Share on other sites
jerrytr5 Posted July 21, 2020 Report Share Posted July 21, 2020 3 hours ago, Eddie Trickett said: I have some 2nd hand trim which I am informed is wlder than TR4. The 250/5 trim is completely different to that on the 4A as are the attachment buttons. Jerry Quote Link to post Share on other sites
Eddie Trickett Posted July 23, 2020 Author Report Share Posted July 23, 2020 Jerry, that's what I was told. i am going to Moss's to get the clips so I will find out if I have the right ones. Regards Eddie Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.