Propshaft Posted July 8, 2020 Report Share Posted July 8, 2020 Hi again. Recommendations for best electronic ignition . Thanking you in anticipation Quote Link to post Share on other sites
DaveR Posted July 9, 2020 Report Share Posted July 9, 2020 The electronic ignition kits now available for the TR7 are basically designed for Lucas 22/25/45 or the earlier Delco type of distributor where a solid magnetic ring fits over the cam. But with the 7's distributor, 300 type, the advance weights are above the cam and therefore prevent the magnetic ring being fitted without strip down the distributor. It has to be fitted bottom end up. AccuSpark and Pertronix are a popular fit, but do require the distributor stripping. There were some TR7 kits that just senses the distributor cam lobes and lacks a magnetic ring or light chopper. For a number of reasons these proved to be unpopular so were discontinued. Dave Quote Link to post Share on other sites
Propshaft Posted July 10, 2020 Author Report Share Posted July 10, 2020 Thanks Dave. I think I am going to go down the luminition route Quote Link to post Share on other sites
DaveR Posted July 11, 2020 Report Share Posted July 11, 2020 22 hours ago, Propshaft said: Thanks Dave. I think I am going to go down the luminition route I haven't heard of any problems with the luminition system on the TR7 Dave Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.