AarhusTr6 Posted June 30, 2020 Report Share Posted June 30, 2020 Dear all Can anyone tell me the purpose of the holes in the back shelf - they appear to be mounting holes to me, and the tab (marked in red circle). I'd like to plug them off but am curious on their purpose. Richard Quote Link to post Share on other sites
iani Posted June 30, 2020 Report Share Posted June 30, 2020 Rollover bar possibly? Quote Link to post Share on other sites
AarhusTr6 Posted June 30, 2020 Author Report Share Posted June 30, 2020 Hmmm . . maybe. Am I also missing some sort of cardboard cover to the left over the transmission shaft? Rich Quote Link to post Share on other sites
iani Posted June 30, 2020 Report Share Posted June 30, 2020 There should be a cardboard cover that goes all the way to the shelf, there is then the interior light that sits on top of that, assuming '71 cars still had that? Quote Link to post Share on other sites
BlueTR3A-5EKT Posted June 30, 2020 Report Share Posted June 30, 2020 (edited) Item 17 here https://www.moss-europe.co.uk/carpet-sets-boot-trim-tr5-6-1967-76.html Peter W PS I have watched these being made - made from 3mm fibre/hard board and steamed + bent+ formed - clamped round a drain pipe. - I'd certainly try at £30. a pop! https://www.wickes.co.uk/Products/Building-Materials/Sheet-Materials/Hardboard/c/1000193 Peter W Edited June 30, 2020 by BlueTR3A-5EKT Quote Link to post Share on other sites
AarhusTr6 Posted June 30, 2020 Author Report Share Posted June 30, 2020 52 minutes ago, BlueTR3A-5EKT said: Item 17 here https://www.moss-europe.co.uk/carpet-sets-boot-trim-tr5-6-1967-76.html Peter W PS I have watched these being made - made from 3mm fibre/hard board and steamed + bent+ formed - clamped round a drain pipe. - I'd certainly try at £30. a pop! https://www.wickes.co.uk/Products/Building-Materials/Sheet-Materials/Hardboard/c/1000193 er W I think I will give the harboard a go! Quote Link to post Share on other sites
astontr6 Posted June 30, 2020 Report Share Posted June 30, 2020 4 hours ago, iani said: Rollover bar possibly? +1 Bruce Quote Link to post Share on other sites
Mark69 Posted June 30, 2020 Report Share Posted June 30, 2020 Rich, if you want a paper template,pm me your address. Mark. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.