AarhusTr6 Posted June 1, 2020 Report Share Posted June 1, 2020 Hi I have a CC from 1970. The fuel cap rubber is perished buy looking at Moss to replace it, the design seems different. Googled a bit and it to me, looks like a GT6 fuel cap - can anybody confirm this? Rubber is perished and fuel smell comes from it so want to fix Cheers Richard Quote Link to post Share on other sites
Paulsb Posted June 1, 2020 Report Share Posted June 1, 2020 it looks the same as the one on my 72 also a cc model,imhave seen some that are a lot smaller hope this helps. Quote Link to post Share on other sites
reginald Posted June 1, 2020 Report Share Posted June 1, 2020 Hi Yes Tr6, tend to be on the US spec cars, seal can be got from Moss. Richard Quote Link to post Share on other sites
Mike C Posted June 1, 2020 Report Share Posted June 1, 2020 That looks like my '69 PI except my locking tab is rounded. Quote Link to post Share on other sites
AarhusTr6 Posted June 2, 2020 Author Report Share Posted June 2, 2020 Oh , ok, thanks guys, So if you look at No12 then the rubber is complete, ie its not a rubber ring gasket, or am I missing something?! https://www.moss-europe.co.uk/shop-by-model/triumph/tr5-6/fuel-system-induction-controls/tanks-pumps-pipes/fuel-system-tr6-from-c-cp50001.html Richard Quote Link to post Share on other sites
Mike C Posted June 2, 2020 Report Share Posted June 2, 2020 Does yours have an O ring in the cap instead of the rubber seal 12? Quote Link to post Share on other sites
AarhusTr6 Posted June 2, 2020 Author Report Share Posted June 2, 2020 3 hours ago, Mike C said: Does yours have an O ring in the cap instead of the rubber seal 12? Exactly, yes, an O ring with a rubber width of about 1cm. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.