Ralph Whitaker Posted May 24, 2020 Report Share Posted May 24, 2020 Sorry chaps, I know this subject has been done to death on here before, but I have spent an hour trying to find it and have had to admit defeat. My car has new 1/4s fitted, so consequently I have lost the positions for the 2 ltd posts that should be there. I felt sure I had seen a dimensioned drawing somewhere that gave the positions for these pegs or am I imagining it. I will be using all new hood, stick cover, and maybe eventually a new tonneau cover, and I think these come without the fasteners fitted, so probably not critical as to positioning, but there must be a "correct" place for these. Mainly concerned with the one at the top of the 1/4 panel that is used for the hood and hood stick cover as these will be the most used. Thanks, Ralph. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 24, 2020 Report Share Posted May 24, 2020 http://trf.zeni.net/wc/specials11.20/9.php Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.