michaeldavis39 Posted May 21, 2020 Report Share Posted May 21, 2020 I am going to be fitting my refurbished calipers and I've noticed that in the diagram of tr6 brake parts there is a caliper alignment shim--there were not any of these shims in place when I stripped the chassis down. Is it necessary to fit these shims? Photo attached Quote Link to post Share on other sites
15eren Posted May 22, 2020 Report Share Posted May 22, 2020 (edited) Hi If the discs are running in the center of the callipers it is not neccassary. Otherwise it may be! Sometimes the discs are so much out of alignment, that they are hitting the callipers. Then You have to align with shims. Regards Tage Edited May 22, 2020 by 15eren Quote Link to post Share on other sites
michaeldavis39 Posted May 22, 2020 Author Report Share Posted May 22, 2020 OK thanks Tage Michael Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.