Jase Posted April 28, 2020 Report Share Posted April 28, 2020 Anyone fitted the Moss bonnet release for the 4A, any pics or instructions please? Thanks Jason Quote Link to post Share on other sites
John L Posted April 28, 2020 Report Share Posted April 28, 2020 If you go to the part number in the Moss catalogue, further down the page, are 2 tabs, one is specification, the other is a instructions, in there is a PDF file to open and download. John Quote Link to post Share on other sites
Jase Posted April 28, 2020 Author Report Share Posted April 28, 2020 Thank you Quote Link to post Share on other sites
Jase Posted April 28, 2020 Author Report Share Posted April 28, 2020 (edited) Just downloaded and that makes no sense at all. I guess it will become clear (I hope) when I do the job. Would be useful to have the drill sizes in mm. Edited April 28, 2020 by Jase Quote Link to post Share on other sites
Darranh Posted April 29, 2020 Report Share Posted April 29, 2020 checks out the Weg's garage video (useful 'resource' for other trouble shooting issues too. Quote Link to post Share on other sites
Jase Posted April 29, 2020 Author Report Share Posted April 29, 2020 Brilliant, that makes it so much easier. Thanks Quote Link to post Share on other sites
stillp Posted April 29, 2020 Report Share Posted April 29, 2020 It's a lot easier on that LHD car! Pete Quote Link to post Share on other sites
Jase Posted May 14, 2020 Author Report Share Posted May 14, 2020 On 4/29/2020 at 1:26 PM, stillp said: It's a lot easier on that LHD car! Pete Hi Pete, just started to do this last night after putting it off. You are right it's not much fun on a RHD. Just looking for my extra long drill bits. Quote Link to post Share on other sites
Ocheye Posted May 14, 2020 Report Share Posted May 14, 2020 I found it easiest to remove the bonnet latch assembly (as it turned out it was a good opportunity to give it a good clean) and drill it on the bench. I also drilled the hole in the firewall from underneath (after measuring it very carefully first) Andy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.