Eddie Trickett Posted April 9, 2020 Report Share Posted April 9, 2020 I have a separate solenoid which came with the car. However I cannot find any bolt holes to fasten it down and I can't find any pictures on the internet giving the location. I am converting to rhd which may or may not affect the location. Does anyone have a photo showing the original location? Thanks Eddie Quote Link to post Share on other sites
BlueTR3A-5EKT Posted April 9, 2020 Report Share Posted April 9, 2020 Rh side of battery about 3 inches back straight back from heater valve Peter W Quote Link to post Share on other sites
Eddie Trickett Posted April 9, 2020 Author Report Share Posted April 9, 2020 Thanks Peter, i will look for the holes tomorrow. Eddie Quote Link to post Share on other sites
stuart Posted April 10, 2020 Report Share Posted April 10, 2020 (edited) 10 hours ago, Eddie Trickett said: Thanks Peter, i will look for the holes tomorrow. Eddie Basically the same place as on a 4a, there should be holes in the battery hold down side plate for it. Stuart. Edited April 10, 2020 by stuart Quote Link to post Share on other sites
Eddie Trickett Posted April 10, 2020 Author Report Share Posted April 10, 2020 Hi Peter, Stuart, i can see the holes, not very accessible at the moment because I have a lump of wood supporting the rear of the engine whilst the gearbox is out. it looks a bit close to the heater hoses but I assume it must fit. many thanks Eddie Quote Link to post Share on other sites
Ian Vincent Posted April 10, 2020 Report Share Posted April 10, 2020 Hi Stuart, I assume that white example in the photo above is one you are rebuilding at the moment. As usual, it looks a work of art. Rgds Ian Quote Link to post Share on other sites
stuart Posted April 10, 2020 Report Share Posted April 10, 2020 (edited) 4 minutes ago, Ian Vincent said: Hi Stuart, I assume that white example in the photo above is one you are rebuilding at the moment. As usual, it looks a work of art. Rgds Ian Actually no thats a stock photo and I would never do plenum drains like that and I also fit wing drains as well and theres a lot of other things I would do differently too Stuart. Edited April 10, 2020 by stuart Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.