TR250 starter solenoid location

[Eddie Trickett]

I have a separate solenoid which came with the car. However I cannot find any bolt holes to fasten it down and I can't find any pictures on the internet giving the location. I am converting to rhd which may or may not affect the location.

Does anyone have a photo showing the original location?

Thanks

Eddie

[BlueTR3A-5EKT]

Rh side of battery about 3 inches back  straight back from heater valve

 

 

Peter W

 

[Eddie Trickett]

Thanks Peter,

i will look for the holes tomorrow.

Eddie

[stuart]

10 hours ago, Eddie Trickett said:

Thanks Peter,

i will look for the holes tomorrow.

Eddie

Basically the same place  as on a 4a, there should be holes in the battery hold down side plate for it.

Stuart.

 

Edited April 10, 2020 by stuart

[Eddie Trickett]

Hi Peter, Stuart,

i can see the holes, not very accessible at the moment because I have a lump of wood

supporting the rear of the engine whilst the gearbox is out.

it looks a bit close to the heater hoses but I assume it must fit.

many thanks

Eddie

[Ian Vincent]

Hi Stuart,

I assume that white example in the photo above is one you are rebuilding at the moment.  As usual, it looks a work of art.

Rgds Ian

[stuart]

4 minutes ago, Ian Vincent said:

Hi Stuart,

I assume that white example in the photo above is one you are rebuilding at the moment.  As usual, it looks a work of art.

Rgds Ian

Actually no thats a stock photo and I would never do plenum drains like that and I also fit wing drains as well and theres a lot of other things I would do differently too

Stuart.

Edited April 10, 2020 by stuart