PJR Posted April 9, 2020 Report Share Posted April 9, 2020 Can anyone advise which type of adhesive should be used when fixing the above - looks like that is what is needed? Quote Link to post Share on other sites
RogerH Posted April 9, 2020 Report Share Posted April 9, 2020 Can you be more descriptive of the part and where it is? Roger Quote Link to post Share on other sites
Gary Flinn Posted April 9, 2020 Report Share Posted April 9, 2020 If you mean the 'P' Section seal that runs down the 'A' Post adjacent the normal door seal, I used Evostick to fix mine? Regards Gary Quote Link to post Share on other sites
DRD Posted April 9, 2020 Report Share Posted April 9, 2020 I think I used contact adhesive as well, and super glue for a few stubborn areas which kept coming adrift. Quote Link to post Share on other sites
Mk2 Chopper Posted April 9, 2020 Report Share Posted April 9, 2020 Can anyone post a pic of where they go as I don't have them on my car. Gareth Quote Link to post Share on other sites
stuart Posted April 9, 2020 Report Share Posted April 9, 2020 Like this on a 5 Stuart. Quote Link to post Share on other sites
Mk2 Chopper Posted April 9, 2020 Report Share Posted April 9, 2020 1 hour ago, stuart said: Like this on a 5 Stuart. Thanks Stuart, is it much different on a 6? Gareth Quote Link to post Share on other sites
stuart Posted April 10, 2020 Report Share Posted April 10, 2020 15 hours ago, Mk2 Chopper said: Thanks Stuart, is it much different on a 6? Gareth No should be the same though you might want it to go a bit further outwards at the bottom, Stuart. Quote Link to post Share on other sites
Mk2 Chopper Posted April 10, 2020 Report Share Posted April 10, 2020 Next order I put in I'll add some and have a go at fitting them. Cheers Gareth Quote Link to post Share on other sites
stuart Posted April 10, 2020 Report Share Posted April 10, 2020 1 hour ago, Mk2 Chopper said: Next order I put in I'll add some and have a go at fitting them. Cheers Gareth Dont forget there are two different sizes of them, a thick and a thin one depending on the gap between the leading edge of your door glass and the screen frame when the glass is fully wound up. Stuart. Quote Link to post Share on other sites
Mk2 Chopper Posted April 10, 2020 Report Share Posted April 10, 2020 Glad you said, I'll check out the gap I've got and see what ones I'll need. Gareth Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.