ijonsson Posted April 3, 2020 Report Share Posted April 3, 2020 This fault was new to me, the engine wasn't running well, so I tried tuning carbs and ignition and checked the plugs. I didn't get any result and it seemed that it ran even worse after checking the plugs. This continued until I finally discovered that the brass insert in the cap, of one of the caps, was stuck on the plug. Checking the other caps showed that 3 out of 4 brass connectors were loose. Substituted them for considerably more expensive caps and the engine is now running as it should. So, advice to myself, stop buying cheap stuff! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.