tr graham Posted March 5, 2020 Report Share Posted March 5, 2020 This picture was taken from a genuine documented 39,000 mile car with no breather plenum is crackle finishblack air box is silver finish graham Quote Link to post Share on other sites
openroad Posted March 5, 2020 Report Share Posted March 5, 2020 Very nice too Graham and with the Original Type Rubbers, So would you say that a Concourse Car should be prepared like that to please the Judges ? I doubt that there are many like that left, and as Stuart points out many owners have made changes over the years, they work just the same but just look different. Best of luck with the rest of your build Tim, will she be at Stratford This summer ? Cheers Conrad. Quote Link to post Share on other sites
Tim T Posted March 5, 2020 Author Report Share Posted March 5, 2020 Fingers crossed but not going to rush it. As many have pointed out it is not a race, but I do need a target deadline!! Tim Quote Link to post Share on other sites
openroad Posted March 5, 2020 Report Share Posted March 5, 2020 Definitely not a race Tim , but the World is now watching you !!! Heheheheh. Have fun , Conrad. Quote Link to post Share on other sites
roy53 Posted March 5, 2020 Report Share Posted March 5, 2020 19 hours ago, stuart said: Over 50 yrs later its not surprising there are differences to be found, its only lately with the escalating prices that people worry too much about originality. The one shown below is restored though not correct its still nice. Oh and that top one in your post doesnt look unrestored especially not with two air valves. Stuart. + 1 Quote Link to post Share on other sites
Tim T Posted March 5, 2020 Author Report Share Posted March 5, 2020 Yes, I thought that might be the case so I might drag it out a little longer !!! Tim Quote Link to post Share on other sites
Tim T Posted March 6, 2020 Author Report Share Posted March 6, 2020 Just been browsing this topic a little further and found this image of CP1. This seems to have yet another set up although I believe that the car is far from original. Tim Quote Link to post Share on other sites
Peter V W Posted March 6, 2020 Report Share Posted March 6, 2020 Hi Tim, attached in my TR5 engine bay, another variation, but works! regards Peter Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.