F1loco Posted February 22, 2020 Report Share Posted February 22, 2020 So I've got a TR4 and was going to run an elbow out of the valve cover plug in the top/middle, then run a hose below the engine to pull a bit more of the pressure out and hopefully slow the weeping. Problem is, I can't find anyone who sells an elbow with a male thread of 1/2-20 (confirmed through my local ACE) to a barb. If anyone has done this, and know where they got the fitting, please advise. I have this style cover. Thanks. Quote Link to post Share on other sites
John L Posted February 22, 2020 Report Share Posted February 22, 2020 There might be something available here, https://www.carbuilder.com/uk/fuel-system-fuel-pump-and-tap-unions#/pageSize=20&viewMode=grid&orderBy=0 Or perhaps Demon Tweeks, John Quote Link to post Share on other sites
F1loco Posted February 22, 2020 Author Report Share Posted February 22, 2020 Thanks, will give them a look. Quote Link to post Share on other sites
F1loco Posted February 22, 2020 Author Report Share Posted February 22, 2020 In the interim, managed to get this rigged set up on and clear the bonnet. Short drive, and still trying to clean/burn the oil off from before, but seems to have helped with the weeping - Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.