PJR Posted February 10, 2020 Report Share Posted February 10, 2020 Is there a place where I can get the instruction of how these can be easily replaced I have the replacements from Rimmer just want to be sure I approach the job in the correct manner Regards Peter Quote Link to post Share on other sites
iani Posted February 10, 2020 Report Share Posted February 10, 2020 Should be glued in, I just used double sided tape. Note that there are two thicknesses of seal available, the larger one was restricting the door glass height on my car so I swapped to the thinner seal. Quote Link to post Share on other sites
SteveB21 Posted February 10, 2020 Report Share Posted February 10, 2020 Hi Peter - as Ian says, maker sure you get the right size seal - hopefully the attached picture and this previous topic should help: https://www.tr-register.co.uk/forums/index.php?/topic/13470-position-of-door-seal-rubber/ Cheers Steve Quote Link to post Share on other sites
stuart Posted February 11, 2020 Report Share Posted February 11, 2020 Also make sure you fit it properly down into the door shut. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.