pjc615ukuk Posted January 20, 2020 Report Share Posted January 20, 2020 Hi All. I am not too far away from taking delivery of my factory steel hardtop,which has undergone a full restoration. I finally bit the bullet and bought all of the necessary mechanical bits & bobs, and the various seals etc. Before I start cutting the fur flex trim, I'm wondering if there are any potential pitfalls or tips I could do with knowing? Also I believe ( previous threads on here) that there are fitting instructions - would anyone have a copy as they're no longer listed on Rimmers website? Thanking you in anticipation... Regards Peter '71 TR6 CP. Quote Link to post Share on other sites
Iruka Posted January 20, 2020 Report Share Posted January 20, 2020 Hi Peter, if you can pm me your email address I can email you a copy of the of the original Triumph fitting instructions. Regards Steve Quote Link to post Share on other sites
pjc615ukuk Posted January 20, 2020 Author Report Share Posted January 20, 2020 Brilliant! Thanks a million! Peter Quote Link to post Share on other sites
Iruka Posted January 20, 2020 Report Share Posted January 20, 2020 Hi Peter, email sent, hope it comes through ok. steve Quote Link to post Share on other sites
dingle Posted January 21, 2020 Report Share Posted January 21, 2020 Here link to an article on the hard top restoration. It has much more detail than the factory fitting instructions. http://www.74tr6.com/hardtop.htm Berry Quote Link to post Share on other sites
iani Posted January 21, 2020 Report Share Posted January 21, 2020 I’d actually posted them on here last month: https://www.tr-register.co.uk/forums/index.php?/search/&q=“Hardtop instructions” bottom of thread. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.