Jump to content

Wiring to ignition light


Recommended Posts

Thanks Roger,

I suspected that was the case, but I didn't get any wiring fitted on the the car at all,

and don't won't to chase the inevitable phantoms all my wiring jobs seem to end up with!:ph34r:

I've also 2 more Autosparks looms to fit to 2 similarly afflicted, but non TR,

projects, and it will be nice not to have to dither about on the same matter!

Many thanks

Roger M-E

Link to post
Share on other sites

 By convention a 'live' feed would be connected to the centre 'pip' on the bulb, so that the metal shroud of the bulb is not live.

However, on that particular bulb both sides can be at supply potential so it doesn't really matter. 

Link to post
Share on other sites

Hi Rob,

Yes, understanding RogH and that the bulb is polarity insensitive,I'm working on the assumption that the bulb contact will become the 'negative' in my case direct from the ignition switch,and thus the connection to the control box wire will be 'positive' for the purposes of my not ever so electrical brain.

Getting there slowly, but the wrong age to start from scratch!!

Thanks

Roger M-E

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.