Jump to content

sticking clutch


Recommended Posts

Fire extinguisher deployed into the gearbox bell housing and a few "burn off" slipping starts.

Mick Richards

Link to post
Share on other sites
  • 3 weeks later...

I believe my clutch may be seized internally. Master and slave cylinders were replaced by previous owner. Transmission shifts through gears when engine is not running. Should I be able to actuate the clutch by hand, if the pushrod is disconnected at the transmission? Thoughts?

 

Link to post
Share on other sites

If you are trying to diagnose then unless you have the transmission tunnel off you will need another person to watch the lever as you operate the pedal. Either that or use a phone to take a video. That should tell you whether the lever is moving properly. 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.