john.r.davies Posted August 26, 2019 Report Share Posted August 26, 2019 At the recent Stratford Interclub meeting, I demonstrated my crank damper testing service. In the development of that, I knew that Triumph fitted no four-cylinder engines with crank dampers, so felt that they did not need my attention. But so many TR2-3-4 owners came to see what I was doing, and to tell me about their engines that it was a steep learning curve, about an interesting controversy! I learnt that Triumph fitted those engines with a large cooling fan, set well forward of the engine on a crank extension. Many owners have removed this, and fitted an electric fan, apparently without causing any problems. Others believe that the original fan has a damper-like effect, and that it is essential that the engine has a crank damper. A modified MBG damper is marketed for this purpose, and the controversy has rumbled on for some time My current equipment, developed for Triumph six-cylinder engines, cannot be used to investigate this, but the technology is transferable. I would like to develop a sensor system that can measure the torsional vibration in the earlier engines, so that owners may know the validity of their favoured solution. To work with me in this, I need the cooperation of a willing owner. Ideally, my co-researcher would live in the North of England, and own a TR4/TR4A, as I am told that access to the front of the engine is easiest in those models. They would be willing to allow me to inspect their car, so that I can design suitable brackets and other fittings, which would be bolted onto the engine for testing and removed afterwards. My co-researcher should also be willing to have the engine tested with and without the original fan, and with an MBG-style crank damper fitted. Each test involves running the engine in a static car and would take twenty minutes, plus time to make alterations and adjustments, so that once the sensors are fitted, the tests could be completed in a single day. My co-researcher would be acknowledged, or not as they wished, in any publication on the project. I believe this project that would use technology new to Triumph and could add valuable information to an unresolved controversy. I will be grateful for anyone who wished to discuss this with me to contact me by personal message. I look forward to an interesting venture! John Davies Quote Link to post Share on other sites
john.r.davies Posted August 27, 2019 Author Report Share Posted August 27, 2019 Or, Come and chat to me at the Duxford meeting, this coming Sunday, 1st September. John Quote Link to post Share on other sites
Malbaby Posted August 27, 2019 Report Share Posted August 27, 2019 Your research results will be very interesting, I applaud your intention. Have you thought of a way to test various weights of harmonic balancers. Flywheel weight variations may also require consideration. Quote Link to post Share on other sites
john.r.davies Posted August 28, 2019 Author Report Share Posted August 28, 2019 My results will be interesting, if I can find someone to work with me, who has a TR4! Otherwise they will be as snoozy as an empty book! How low in weight do TR4 flywheels go, and from where? Six cylinder flywheels are as high as 20kgs in saloons and as low as 5 for racing. I would expect that flywheels are usually much heavier than crank dampers (2.5L 6-cyl is 2.5kgs) and much wider, so with a higher moment of inertia, so with the exception of extreme race mods won't be significant. And, a project that changed flywheels would demand so much more work, time, expence and cheerful cooperation, if I wanted to test the effect of that change, that I am NOT asking to do that! Changing a damper on a six might take an hour; on a TR4 I have yet to find out! John Quote Link to post Share on other sites
Ocheye Posted September 14, 2019 Report Share Posted September 14, 2019 I'm in Carlisle. I believe my TR4 actually has a TR4A engine. Certainly it has a TR4A high port head. Is that too far away? Andy Quote Link to post Share on other sites
john.r.davies Posted September 14, 2019 Author Report Share Posted September 14, 2019 Not at all, Ocheye! I'll PM you! John Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.