Jump to content

LED electronic flasher unit


Recommended Posts

Gentlemen,

I have fitted led flasher bulbs to my 4A and now have to install the flasher unit. The unit I was sent is numbered 10R 02 7394. The four pins each have two numbers.

Pin 1 is numbered 1 and also has a + sign, the pin numbered 2 also has  C by it, the pin numbered 4 has — sign by it,  the pin numbered 5 has an R by it. There is no PIN number 3.

I have “researched” on the internet and I think the wiring to the pins is:

Pin 1 —. feed from ignition

Pin 2.—  wire from the indicator switch

Pin 4 — to earth

Pin 5 — to the indicator warning light

I would be extremely grateful if one of the electrics experts on here could confirm the above and, if I am wrong, let me have the correct wiring positions.

Thanks

Graham

Link to post
Share on other sites

Pete,

Unfortunately there were no instructions and when I phoned customer support at the bulb company that supplied it they did not which wire went where.

Graham

Link to post
Share on other sites

Unbelievable supplier! 

Link to post
Share on other sites

Your guess is probably right Graham, but I agree with Pete and Monty. The supplier should give that information. 

Are you sure there's nothing on the box it came in?

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.