boxofbits Posted August 22, 2019 Report Share Posted August 22, 2019 https://m.youtube.com/watch?v=7RRH3ovWiLM Quote Link to post Share on other sites
stillp Posted August 22, 2019 Report Share Posted August 22, 2019 Couldn't watch that, the shaky camera was making me seasick. Pete Quote Link to post Share on other sites
Drewmotty Posted August 22, 2019 Report Share Posted August 22, 2019 Good grief One point prompted by the video: If you are lucky enough to own two Syncrometers don’t forget to swop them over once the carbs are balanced and re-compare to check that they are equally calibrated.....you’ll probably find that they aren’t and will have to revert to swooping them back and forth Using two Syncros is still a good idea as using two should equalise the restriction on each carb. Quote Link to post Share on other sites
boxofbits Posted August 22, 2019 Author Report Share Posted August 22, 2019 Yes Pete, not sure what was shaking the most..the camera or the engine! Andrew , he is fortunate to have two synchrometers but it still seemed to be running like a sack of at the end! They look like new carbs to me but I would have thought he would be best to tune the mixture with the filters in place. Kevin Quote Link to post Share on other sites
billy l Posted August 23, 2019 Report Share Posted August 23, 2019 9 hours ago, boxofbits said: Yes Pete, not sure what was shaking the most..the camera or the engine! Andrew , he is fortunate to have two synchrometers but it still seemed to be running like a sack of at the end! They look like new carbs to me but I would have thought he would be best to tune the mixture with the filters in place. Kevin Hi Kevin, Didn't see him tune or adjust anything? Think those carbs require properly setting up. For a start the throttle spindle clamps need to be loose. Quote Link to post Share on other sites
Lebro Posted August 23, 2019 Report Share Posted August 23, 2019 I don't think I will be getting him to tune my engine thank you ! Bob Quote Link to post Share on other sites
stillp Posted August 23, 2019 Report Share Posted August 23, 2019 I wouldn't get him to change a light bulb! Pete Quote Link to post Share on other sites
RogerH Posted August 23, 2019 Report Share Posted August 23, 2019 I managed the first minute and then I thought Tit !! Roger Quote Link to post Share on other sites
rogerguzzi Posted August 23, 2019 Report Share Posted August 23, 2019 No finishers on the braided fuel hoses and rubbish worm clips! Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.