Oddball Posted July 23, 2019 Report Share Posted July 23, 2019 (edited) . Edited July 27, 2020 by Cameron Quote Link to post Share on other sites
Drewmotty Posted July 23, 2019 Report Share Posted July 23, 2019 (edited) Clean it off with solvent and then wet and dry. has the car been standing for some time? Are there any surface cracks?......if there are it’s toast. Looks like light marks from the friction plate being sat on the flywheel which should clean off.....unless the marks are actually grooves in the surface. Difficult to tell from a photo.....well it is on my phone Edited July 23, 2019 by Drewmotty Quote Link to post Share on other sites
Oddball Posted July 23, 2019 Author Report Share Posted July 23, 2019 Thanks, this photo was take just after the gearbox was removed about 18 months ago.This is the slipping Clutch problem from my other thread. From what I remember it clean up, however I’ll see when the box comes out again.Am now convinced that the main clutch is the problem. Quote Link to post Share on other sites
matt george Posted July 24, 2019 Report Share Posted July 24, 2019 FWIW, that doesn't look anything out of the ordinary to me. As said, if there are any cracks then it is a different matter. Good luck! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.