Vic787 Posted July 15, 2019 Report Share Posted July 15, 2019 (edited) Hope this is not a dumb question but some time ago I fitted Pertronix electronic ignition to my 1962 TR 4. I have spare points condenser and distributor body lead to points. I cannot find Lead from coil. I need to make one, can anyone tell me the gauge of cable please. ( just in case Ignitor fails) thanks. Edited July 15, 2019 by Vic787 Missing word Quote Link to post Share on other sites
bob-menhennett Posted July 16, 2019 Report Share Posted July 16, 2019 This is what you need with Lucar connectors and plastic insulator covers each end for the coil / distributor lead. https://www.autoelectricsupplies.co.uk/product/66/category/11 Code 010102 14/0.30 8.75A OD2.6mm Bob Quote Link to post Share on other sites
Vic787 Posted July 28, 2019 Author Report Share Posted July 28, 2019 Thanks Bob, I have been able to wire the ignition. Parts I required for the distributor DM2 are no longer available but with a bit of cobbling and doctoring I was able to assemble the correct parts as replacements should the electronic ignition fail. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.