PodOne Posted July 7, 2019 Report Share Posted July 7, 2019 Evening all Today I have stripped the doors so they are easier to bolt on and off and to repair the lower edges of the door shells as the last owner had the skins replaced over them! Anyway the window channels are salvageable and just need new felt, any recommendations? However I'm missing 3 of the white nylon "stops" riveted to the channels anyone got any scrap ones they could let me have? New ones aren't exactly cheap! Thanks Andy Quote Link to post Share on other sites
ed_h Posted July 7, 2019 Report Share Posted July 7, 2019 (edited) Many people use the soft side of Velcro, and that apparently works well. I would have done it that way if I didn't have an alternative. Don't know about the nylon parts. You can buy nylon stock to make them from. This may trigger some ideas: http://bullfire.net/TR6/TR6-112/TR6-112.html Ed Edited July 7, 2019 by ed_h Quote Link to post Share on other sites
PodOne Posted July 8, 2019 Author Report Share Posted July 8, 2019 Thanks Ed Already read your chapter at least three times! Andy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.