Andy Moltu Posted July 4, 2019 Report Share Posted July 4, 2019 Just swapping the suspension bushes and ball joints. Just want to check - looking from above at the near side wishbones is this the correct alignment of the H bracket and wishbones? Andy Quote Link to post Share on other sites
Geko Posted July 4, 2019 Report Share Posted July 4, 2019 Correct if you aim at the original camber setup Quote Link to post Share on other sites
rcreweread Posted July 4, 2019 Report Share Posted July 4, 2019 If its a 4A , I thought the top wishbone mounting arm had to be the other way round - if its a 4, then its correct. As for the arms themselves. I cant remember and not at home so cant check. I'm sure someone else will now better than me Cheers Rich Quote Link to post Share on other sites
Andy Moltu Posted July 4, 2019 Author Report Share Posted July 4, 2019 Just checking it was the same as the TR6 set up. Which the consensus seems to be that it is. Quote Link to post Share on other sites
Geko Posted July 5, 2019 Report Share Posted July 5, 2019 That's the for the 4A Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.