Steve P Posted May 18, 2019 Report Share Posted May 18, 2019 Evening gents, Anyone installed the Moss CV, drive shaft and hub? If so any comments? Thanks Steve Quote Link to post Share on other sites
RogerH Posted May 18, 2019 Report Share Posted May 18, 2019 Hi Steve, the Moss webcat states that for the TR6 it is NCA (not currently available) but is shown under TR4A At £1095 for one that sounds expensive. if that is one pair then a little better. Why not go for the quality standard drive shafts from Proptech services in Kidderminster Roger Quote Link to post Share on other sites
DaveB66 Posted May 18, 2019 Report Share Posted May 18, 2019 Hi Steve I fitted CV driveshafts and hubs last year and they're brilliant, I suggest you go ahead and purchase them. If Moss aren't available I suggest you look at Rimmers or Classic Driving Development who both do them at a similar price. ATB Dave Quote Link to post Share on other sites
Nigel Triumph Posted May 18, 2019 Report Share Posted May 18, 2019 +1 for Classic Driving Development. I have their drive shafts on both my TR6 and GT6. Fit and forget! Nigel Quote Link to post Share on other sites
15eren Posted May 19, 2019 Report Share Posted May 19, 2019 I also had a pair from CDD and I am sorry to tell, that I was not impressed. There was a little play in the bearings in one of the alloy-hubs and there was a significant play in one of the CV-joints. The end of the story was, that I had to rebuild one of the hubs and one of the shafts myself, after finding new parts. But after that, I agree, the CV-jointed half-shafts are an improvement. Tage Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.