Jump to content
Sign in to follow this  
mickjj1

Seat Belt Upgrade.

Recommended Posts

Hi, while in the midst of restoring my 69 TR6 Iv'e decided to upgrade the seat belts. After scouring the forums I have gone with a pair of Securon 500/30 belts. The install seems straight forward but I am unsure on how to install the stalk. In my car the seat belt anchors are the eye bolts which the old belts clipped on to but if I remove that do I have to add an angle bracket or can I bolt through the eye??  Any advice would be much appreciated.

Mick

Share this post


Link to post
Share on other sites

remove the eye bolt and your new stalk bolts into the same hole.

 

ROY

Share this post


Link to post
Share on other sites

You may need to give the stalk a twist to get them to line up nicely up the side of the seat.

Stuart.

Share this post


Link to post
Share on other sites
37 minutes ago, roy53 said:

remove the eye bolt and your new stalk bolts into the same hole.

 

ROY

The eye bolt is in the floor so sitting up vertical which would mean the stalk would have to be bent ninety degrees is that OK?

Share this post


Link to post
Share on other sites

Hi mickjj1

I recently replaced the static belts on my 6 with the same type as you are fitting ,you do have to bend and twist the stalk to fit the bolt also at the side of the seat.

As long as you do not use undue force ( they will adjust with hand pressure) then that will be fine. The original Britax stalks that came off were bent in this way.

Brian

Share this post


Link to post
Share on other sites

Thanks for the input I will let you know how it all works out.

Share this post


Link to post
Share on other sites

I used the L brackets that came with mine and find this kept the stalks more out of the way on the seats, especially when tilting.

Rich

 

Share this post


Link to post
Share on other sites
On 5/10/2019 at 4:23 PM, AarhusTr6 said:

I used the L brackets that came with mine and find this kept the stalks more out of the way on the seats, especially when tilting.

Rich

 

Which way did you put the bracket, long or short side vertical?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.