mickjj1 Posted May 10, 2019 Report Share Posted May 10, 2019 Hi, while in the midst of restoring my 69 TR6 Iv'e decided to upgrade the seat belts. After scouring the forums I have gone with a pair of Securon 500/30 belts. The install seems straight forward but I am unsure on how to install the stalk. In my car the seat belt anchors are the eye bolts which the old belts clipped on to but if I remove that do I have to add an angle bracket or can I bolt through the eye?? Any advice would be much appreciated. Mick Quote Link to post Share on other sites
roy53 Posted May 10, 2019 Report Share Posted May 10, 2019 remove the eye bolt and your new stalk bolts into the same hole. ROY Quote Link to post Share on other sites
stuart Posted May 10, 2019 Report Share Posted May 10, 2019 You may need to give the stalk a twist to get them to line up nicely up the side of the seat. Stuart. Quote Link to post Share on other sites
mickjj1 Posted May 10, 2019 Author Report Share Posted May 10, 2019 37 minutes ago, roy53 said: remove the eye bolt and your new stalk bolts into the same hole. ROY The eye bolt is in the floor so sitting up vertical which would mean the stalk would have to be bent ninety degrees is that OK? Quote Link to post Share on other sites
brian -r Posted May 10, 2019 Report Share Posted May 10, 2019 Hi mickjj1 I recently replaced the static belts on my 6 with the same type as you are fitting ,you do have to bend and twist the stalk to fit the bolt also at the side of the seat. As long as you do not use undue force ( they will adjust with hand pressure) then that will be fine. The original Britax stalks that came off were bent in this way. Brian Quote Link to post Share on other sites
roy53 Posted May 10, 2019 Report Share Posted May 10, 2019 SORRY I WAS THINKING 4 & 5 not 6 ROY Quote Link to post Share on other sites
mickjj1 Posted May 10, 2019 Author Report Share Posted May 10, 2019 Thanks for the input I will let you know how it all works out. Quote Link to post Share on other sites
AarhusTr6 Posted May 10, 2019 Report Share Posted May 10, 2019 I used the L brackets that came with mine and find this kept the stalks more out of the way on the seats, especially when tilting. Rich Quote Link to post Share on other sites
mickjj1 Posted May 16, 2019 Author Report Share Posted May 16, 2019 On 5/10/2019 at 4:23 PM, AarhusTr6 said: I used the L brackets that came with mine and find this kept the stalks more out of the way on the seats, especially when tilting. Rich Which way did you put the bracket, long or short side vertical? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.