roger murray-evans Posted May 9, 2019 Report Share Posted May 9, 2019 Hi, Does anyone know of a source for these nowadays? Have acquired a steel hardtop missing these and also the 5 rear angle brackets which shouldn't present as much of a challenge? Roger M-E Quote Link to post Share on other sites
Hamish Posted May 10, 2019 Report Share Posted May 10, 2019 (edited) Roger dont forget my hardtop hints and tips thread. There is some info there with pics and videos. You have commented on it too it’s not all about the roll bar being in the way. I'm afraid the cantrails will be a challenge to find. i made my own 5 lower brackets and quite easy to do. I made them with longer tails so I had some adjustment on the top height to the body. i don’t think the brackets and screws I took off were original but you can have them to try if you want. PM me. I had to plate the hard top where they fit to provide a bit more strength. Edited May 10, 2019 by Hamish Quote Link to post Share on other sites
iain Posted May 10, 2019 Report Share Posted May 10, 2019 Cantrails were remanufactered by B Smith? Some years ago....Try IanC for details Iain Quote Link to post Share on other sites
John Morrison Posted May 10, 2019 Report Share Posted May 10, 2019 ....and very good they are too! John. Quote Link to post Share on other sites
iain Posted May 10, 2019 Report Share Posted May 10, 2019 I need to apologise to Ian Smith of Chiltern group. Apparently he doesn't do the Forum, but Peter Bowden can contact him for you. Iain Quote Link to post Share on other sites
foster461 Posted May 10, 2019 Report Share Posted May 10, 2019 I got several sets from Ian in 2016 and they are excellent. At the time I recall Ian leaving the option open for another production run. Stan Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.