roger murray-evans Posted May 7, 2019 Report Share Posted May 7, 2019 (edited) Can anyone tell me what length the 'all thread' type of early TR2 jack should be? I'd be most grateful! Roger M-E Edited May 11, 2019 by roger murray-evans wrong heading Quote Link to post Share on other sites
EdwinTiben Posted May 13, 2019 Report Share Posted May 13, 2019 (edited) Hi, i have 2 versions of the jacks, both different and both confirmed original. One with a stanpart tag on it.. so which one ? Edited May 13, 2019 by EdwinTiben Quote Link to post Share on other sites
foster461 Posted May 13, 2019 Report Share Posted May 13, 2019 Hi Edwin ! I have only seen one early TR2 jack mentioned (fully threaded rod, built in handle etc) although Terri Ann Wakeman describes an early and a later TR2 jack but with no dimensions. The VTR web site has this info: Quote Link to post Share on other sites
EdwinTiben Posted May 14, 2019 Report Share Posted May 14, 2019 (edited) In my search of a jack i looked at different pictures and jacks confirmed by owners to be original to their car. There seem to be used 4 different kind of jacks. The two i have differ the most as they have different threads. The other ones are variations with other cups/feet. The one on the VTR site has a different foot than mine and the one in the instruction booklet. So not easy to say which one is the correct one.. Here's the one from Colin Briscoe with his lovely tr2 (and inspiration for my rebuild) which is used in one of the books of Bill P. Edited May 14, 2019 by EdwinTiben Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.