Grahamgl Posted May 3, 2019 Report Share Posted May 3, 2019 Gentlemen, Can someone please tell me the thread form of the studs which hold the screen vent outlets in place? Thanks Graham Quote Link to post Share on other sites
stuart Posted May 4, 2019 Report Share Posted May 4, 2019 I think they are 10/32 UNF. Stuart. Quote Link to post Share on other sites
RogerH Posted May 4, 2019 Report Share Posted May 4, 2019 Hi Graham, I have just checked mine and they are 2BA. It may be that over the years people have fitted 10/32 and have got them on as they are quite a close thread form. Roger Quote Link to post Share on other sites
tim hunt Posted May 4, 2019 Report Share Posted May 4, 2019 Roger, wouldn't it be 10-32? 10/32 would simplify to 5/16, something quite different. Tim Quote Link to post Share on other sites
RogerH Posted May 4, 2019 Report Share Posted May 4, 2019 Hi Tim, one would think that the TR being built in the UNF period it would be 10/32 - but mine are defo 2BA. 10/32 = No. 10 screw at 32 tpi. The 2BA pitch is 31.4tpi so almost there. Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.