leonnewman1 Posted May 1, 2019 Report Share Posted May 1, 2019 Hi. I am swapping out the wires for minilites on my 4a with press in studs all round and I would like to use open nuts. Are the front studs the same as the rear? I was able to get some extra long studs from moss for the front but only standard steel wheel studs for the rear which are considerably shorter. Or any other advice? Thanks Quote Link to post Share on other sites
RogerH Posted May 1, 2019 Report Share Posted May 1, 2019 Hi Leon, the fronts are pan head, the rears are countersink so they can't be swapped over. Longer rears are available but from where I am at a loss at the moment to remember where. Roger Quote Link to post Share on other sites
Steves_TR6 Posted May 1, 2019 Report Share Posted May 1, 2019 1 hour ago, RogerH said: Hi Leon, the fronts are pan head, the rears are countersink so they can't be swapped over. Longer rears are available but from where I am at a loss at the moment to remember where. Roger Classic Driving Developments supplied me with some longer rear ( and front) wheel studs steve Quote Link to post Share on other sites
monty Posted May 2, 2019 Report Share Posted May 2, 2019 On 1 May 2019 at 6:24 PM, RogerH said: Hi Leon, the fronts are pan head, the rears are countersink so they can't be swapped over. Longer rears are available but from where I am at a loss at the moment to remember where. Roger I got some longer studs from TR Enterprises a while ago. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.