Miketr Posted April 17, 2019 Report Share Posted April 17, 2019 Does the TR7 need a secondary bonnet releade mechanism like the TR6? Quote Link to post Share on other sites
jfg Posted April 19, 2019 Report Share Posted April 19, 2019 Mine has a single mechanism in the centre of the bulkhead. Pull release next to the choke. Quote Link to post Share on other sites
dursley Posted May 8, 2019 Report Share Posted May 8, 2019 Quite a few folks have had the cable break and it is then a bit of a fiddle to open the bonnet. You can do it through that wire grille but its not easy. I have put a back-up on my cars using a piece of welding rod that pulls the slider and comes out just under the corner of the bonnet on the left side. I tend to always use that rather than the actual cable pull most times. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 8, 2019 Report Share Posted May 8, 2019 Be careful theta welding rod does not touch the red battery terminal. Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.