qkingston Posted April 2, 2019 Report Share Posted April 2, 2019 A while ago I saw a thread with a photo of a TR4a front ARB bolted to a TR6 rad shield, now I can't find it again! Which bit of the shield should it bolt through and are there any approved dimensions of where the U bolts should be fitted? From what I can see it must be on the sloped section of the rad shield; photo much appreciated Regards David Quote Link to post Share on other sites
Peter V W Posted April 2, 2019 Report Share Posted April 2, 2019 David, ARB fitted to rad shied on TR5. Regards Peter Quote Link to post Share on other sites
qkingston Posted April 2, 2019 Author Report Share Posted April 2, 2019 Thanks Peter, just the job! Regards David Quote Link to post Share on other sites
peejay4A Posted April 2, 2019 Report Share Posted April 2, 2019 Isn’t it predrilled? Mine was when I fitted it to my 4A. Quote Link to post Share on other sites
stuart Posted April 3, 2019 Report Share Posted April 3, 2019 9 hours ago, peejay4A said: Isn’t it predrilled? Mine was when I fitted it to my 4A. Yes they are. Stuart. Quote Link to post Share on other sites
.thumb.jpg.b868f6e327c2f72ca543e9f9a5d24c82.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.