Jump to content

Recommended Posts

Hello, not sure if this is where I should post, but here goes, I have an ecoair dehumidifier, DD122 Classic Mk5 that is playing up, briefly, it switches itself off after 20 minutes running on all three settings, I have checked the manual, no help, after having searched on t'internet it appears it could be a thermal cutout, anybody on here got any advice, experience, wiring diagram before I consign to the tip and buy another, it seems such a waste as the thing is not long out of warranty, cheers, Andrew

Link to post
Share on other sites

Hello, thanks for the response, done all the usual visual checks, I think it is heat related as the thing cuts out completely instead of showing a fault light, my next course is to tack down the heat switch, any clues to its whereabouts gratefully received, cheers, Andrew

Link to post
Share on other sites

Andrew,

Here is a generic fault-finding web page https://www.goodairgeeks.com/dehumidifier-keeps-shutting-off/

Also electric motors often have an inbuilt thermal cutout.

Sounds as if it is the out-of-warranty detector chip, most things I buy seem to have one of those!

Alan

 

Edited by barkerwilliams
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.