jfg Posted March 10, 2019 Report Share Posted March 10, 2019 I'm about ready to get the car into my garage for the first time (it's currently in storage a while away) and was wondering what gauge steel was used in the original build. As my van is off the road i need a friend to pick up the sheet steel for me. My first job is to close the hole in the roof. Second is to cut out and patch the front wings. Third replace both floor pans and (hopefully) finally repair all needed areas in the boot. Quote Link to post Share on other sites
stuart Posted March 11, 2019 Report Share Posted March 11, 2019 Use 18SWG or 1.2mm its strong and easier to weld without blowing holes in it, its what we use all the time for panel repairs. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.