Jump to content

Replacing letters/badges


Recommended Posts

Hi all,

getting round to re-fitting all the

letters, bonnet badge etc, following some paint work.

Whats the current thinking about using something like non-setting windscreen sealant,

just to stop any rattles, thinking a tiny blob, in the plastic cap, before locating on

the letter pin etc.

John.

Link to post
Share on other sites

TBH you shouldnt need anything if the cap is a good fit in the hole, if not then a dob in the hole then insert the plastic cap, wipe off excess then fit the badge/letter

Stuart.

Link to post
Share on other sites
  • 2 weeks later...

Just to be clear here.

I fitted my new badges and letters by pushing the rubber sleeve from the back. Doh. Tricky and they rattle when the engine runs. Rubbish.

Take 2. Fit the rubber sleeves in the holes, as per Stuart, hence the sleeve lip and then fit the badges letters. Vaseline good.

Simples when you know.

RobG

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.