John Morrison Posted February 20, 2019 Report Share Posted February 20, 2019 Hi all, getting round to re-fitting all the letters, bonnet badge etc, following some paint work. Whats the current thinking about using something like non-setting windscreen sealant, just to stop any rattles, thinking a tiny blob, in the plastic cap, before locating on the letter pin etc. John. Quote Link to post Share on other sites
stuart Posted February 20, 2019 Report Share Posted February 20, 2019 TBH you shouldnt need anything if the cap is a good fit in the hole, if not then a dob in the hole then insert the plastic cap, wipe off excess then fit the badge/letter Stuart. Quote Link to post Share on other sites
RobG Posted March 4, 2019 Report Share Posted March 4, 2019 Just to be clear here. I fitted my new badges and letters by pushing the rubber sleeve from the back. Doh. Tricky and they rattle when the engine runs. Rubbish. Take 2. Fit the rubber sleeves in the holes, as per Stuart, hence the sleeve lip and then fit the badges letters. Vaseline good. Simples when you know. RobG Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.