Robert Price Posted January 21, 2019 Report Share Posted January 21, 2019 Having obtained a Lucas original switch which appears to be in good condition and fitted it, I have no indicators. There is power to the switch but nothing either side when switched, no clicking from the flasher unit and no light on the dash bulb. I have not yet checked power at the flasher unit but is the latter an indication the flasher has packed up? I had expected to find power each side of the switch when on. Rob Quote Link to post Share on other sites
Mike C Posted January 21, 2019 Report Share Posted January 21, 2019 I suspect you might have a faulty switch. Might be worth trying a jumper across the switch to check the remainder of the system. Quote Link to post Share on other sites
Robert Price Posted January 22, 2019 Author Report Share Posted January 22, 2019 Thanks Mike, have now got power from switch wires, however still no indicators but noticed that the ELO electronic flasher which has a perspex cover was wet inside, despite drying out no success. I think a new relay will be next just to eliminate it. It could be a resistance which is causing the voltage to drop off when switched on. Rob Quote Link to post Share on other sites
Robert Price Posted January 28, 2019 Author Report Share Posted January 28, 2019 Problem now solved, new relay and have also found fusebox spade connection poor on F/Box, despite it looking ok having taken it off so cleaned spade and will see how it behaves. Rob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.