RichyBarber Posted January 21, 2019 Report Share Posted January 21, 2019 Hi, looking for someone that can turn a rebate into the back of TR6 pulley wheel to accommodate a trigger wheel. Happy to pay going rate / beer tokens etc. Any suggestions of companies welcomed. Thanks Quote Link to post Share on other sites
AndrewMAshton Posted January 21, 2019 Report Share Posted January 21, 2019 Richy, you may already know this but vital the trigger wheel is centred, the clearance between trigger wheel and sensor is about 5 thou, if you struggle I had mine done locally in Harrogate by a one man machine shop, the bloke in there wears a brown coat, always a good sign!, cheers, Andrew Quote Link to post Share on other sites
steamy Posted January 21, 2019 Report Share Posted January 21, 2019 Hi Richy, Try and find your local Model Engineering Club most there could do the job. I could do it for you but am in Aylesbury regards Ian Quote Link to post Share on other sites
RichyBarber Posted January 21, 2019 Author Report Share Posted January 21, 2019 thanks - Aylesbury not too far away - may contact you if I cant find anyone locally - local engineering company quoted £170 !!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.