PodOne Posted January 14, 2019 Report Share Posted January 14, 2019 Hi all Hubs and discs going on tomorrow and after reading about the felt seals I wondered if anyone had replaced these with a proper seal rubber/synthetic seal? Googlized it nothing coming up. If anyone has what did you use and how. Cheers Andy Quote Link to post Share on other sites
RogerH Posted January 15, 2019 Report Share Posted January 15, 2019 Hi Andy, the felt seal works OK. Make sure it is not too thick when fitting (just thicker than the metal cup). Do NOT over fill the hub with grease - just the bearings. Roger Quote Link to post Share on other sites
JochemsTR Posted January 15, 2019 Report Share Posted January 15, 2019 (edited) Hi Andy, I replaced the felt seal with a synthetic version. Look into this link or search "Front Hub Issue": Some people were sceptical.....but it works perfect and I have about 4,000 mls on it already. Jochem Edited January 15, 2019 by JochemsTR Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.