Andrew Smith Posted January 12, 2019 Report Share Posted January 12, 2019 (edited) Hi Folks, I've been having a clear out of surplus TR stuff and trying to make space in my garage, so have the following for sale - photos to follow, but if any interest before I do then I can send individual photos by email. Large parts to be collected please or a mutually convenient pick-up point arranged - small items can be posted at cost or collected - please PM me if interested. (SOLD ITEMS REMOVED) TR6 Original green CR ‘Ripualt’ HT leads set – very good condition and in working order, ideal for concours or originality - £35 Photos Original Lucas fuel filter housings (x2) - £5 ea Original pair TR6 brake disc shields (painted) - £25 NOS (ex-Cox & Buckles) rear bumper corner nearside, probably 35+ years old and still wrapped in sticky bandage, the chrome appears OK and no dings - £50 Original front and rear engine lifting eyes, good used - £30 pair Sidescreen/TR4/5/6 A-type (OD) 4-synchro top plate cover c/w dipstick hole/filler hole (can be plugged, Part No: 108114), rebuilt in July 18 by Pete Cox - £50 (will fit TR4/5/6) Tecalemit grease gun, stripped of paint - £10 Tecalemit grease gun, still has original paint - £10 TR4 New Moss foot operated headlight switch - £10 Moss Link Cheers, Andrew Edited March 26, 2019 by Andrew Smith Quote Link to post Share on other sites
pfenlon Posted January 12, 2019 Report Share Posted January 12, 2019 Pauper Pete, just back from the local food bank. No luck today rabbiting with our Jack Russel, god life's tough. Does the heater valve work easily, or is it as resistant as most of them are, I found the Taxi heater valve the easiest to operate and cheap at £18, but they look Naff. If its a working one I will be in a position in a few days to go to £20 for the old dog, this subtle method always works on the Antiques road show. Have you got 4 Philidas nuts Andrew? Best Pete Quote Link to post Share on other sites
Andrew Smith Posted January 12, 2019 Author Report Share Posted January 12, 2019 1 hour ago, pfenlon said: Pauper Pete, just back from the local food bank. No luck today rabbiting with our Jack Russel, god life's tough. Does the heater valve work easily, or is it as resistant as most of them are, I found the Taxi heater valve the easiest to operate and cheap at £18, but they look Naff. If its a working one I will be in a position in a few days to go to £20 for the old dog, this subtle method always works on the Antiques road show. Have you got 4 Philidas nuts Andrew? Best Pete Cant help with the nuts Pete, but the heater valve has a smooth action - the Antiques road show rarely have their first offer accepted.................PM me if you want it. Cheers, Andrew Quote Link to post Share on other sites
david ferry Posted January 12, 2019 Report Share Posted January 12, 2019 Hi Andrew, Is the axle case for a sidescreen car, or a TR4? David Quote Link to post Share on other sites
Andrew Smith Posted January 12, 2019 Author Report Share Posted January 12, 2019 Just now, david ferry said: Hi Andrew, Is the axle case for a sidescreen car, or a TR4? David Hi David, It was for my 3A. Regards, Andrew Quote Link to post Share on other sites
david ferry Posted January 12, 2019 Report Share Posted January 12, 2019 Can you consider it sold please. Sadly, I’ve just come back up the M40 but will be back down soon and will hopefully be able to come and pay/collect. David Quote Link to post Share on other sites
Andrew Smith Posted January 12, 2019 Author Report Share Posted January 12, 2019 Just now, david ferry said: Can you consider it sold please. Sadly, I’ve just come back up the M40 but will be back down soon and will hopefully be able to come and pay/collect. David Your name is now on it David! Regards, Andrew Quote Link to post Share on other sites
Tonyloz Posted January 12, 2019 Report Share Posted January 12, 2019 Pm sent Quote Link to post Share on other sites
Andrew Smith Posted January 12, 2019 Author Report Share Posted January 12, 2019 1 hour ago, Tonyloz said: Pm sent Tony, No PM received? Cheers, Andrew Quote Link to post Share on other sites
Tonyloz Posted January 13, 2019 Report Share Posted January 13, 2019 It says you cannot recieve messages on my message Quote Link to post Share on other sites
Andrew Smith Posted January 13, 2019 Author Report Share Posted January 13, 2019 16 minutes ago, Tonyloz said: It says you cannot recieve messages on my message Bizarre, I sent you one last night did you get it? Quote Link to post Share on other sites
Tonyloz Posted January 13, 2019 Report Share Posted January 13, 2019 Yes got yours but i cant send mine to you...says you cant recieve my message Anyway is the head still for sale? Any photos thanks Tony Quote Link to post Share on other sites
Andrew Smith Posted January 13, 2019 Author Report Share Posted January 13, 2019 Yes, it still here Tony - I'll take some photos later. Cheers, Andrew Quote Link to post Share on other sites
Andrew Smith Posted January 13, 2019 Author Report Share Posted January 13, 2019 (edited) 6 hours ago, Tonyloz said: Any photos thanks Tony Hi Tony, Photos are at this Link - the head has been sitting on the block for the last 25 years and periodically sprayed with WD40. If your'e interested, please email me at andrew_s @ ntlworld.com (delete the spaces between the @ sign). Cheers, Andrew Edit: I've just been having a close look the photos myself and spotted this: So have just been back out into the garage with a trusty rag and Stanley blade and yes, it's got a bloody crack - probably can be repaired and if you or anyone else is interested this will be reflected in the price: Edited January 13, 2019 by Andrew Smith Quote Link to post Share on other sites
Tonyloz Posted January 13, 2019 Report Share Posted January 13, 2019 Hi Andrew I was hoping it would be the later head with the champhered combustion chamber so its not what im after Thanks for your time on this Tony Quote Link to post Share on other sites
Ian Vincent Posted January 13, 2019 Report Share Posted January 13, 2019 FWIW It took me an afternoon to create a chamfered head ( plus some other improvements) on a TR3a head. Rgds Ian Quote Link to post Share on other sites
Willie Felger Posted January 23, 2019 Report Share Posted January 23, 2019 Hello Andrew, May I have the TR3A dipswitch please. Grateful for the total cost including postage - mates rate of course! Best regards, Willie Quote Link to post Share on other sites
Andrew Smith Posted January 23, 2019 Author Report Share Posted January 23, 2019 24 minutes ago, Willie Felger said: Hello Andrew, May I have the TR3A dipswitch please. Grateful for the total cost including postage - mates rate of course! Best regards, Willie Hi Willie, PM sent. Cheers, Andrew Quote Link to post Share on other sites
Lebro Posted January 28, 2019 Report Share Posted January 28, 2019 Andrew you have a PM Bob. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.